🌎 WE SHIP WORLDWIDE! 🌏

CRANK PARTS

  • sort by

QUICK VIEW

8mm crank arm bolts

$ 4.00

Basic hardened steel M8 crank bolts with a flanged 14mm head. Use them to hold your crank arms on! These will fit underneath Sugino and Campy dust caps.    🔧...
QUICK VIEW

8mm hex crank arm bolts

$ 5.00

Nothing fancy to see here, folks...just your average, run-of-the-mill 8mm crank arm fixing bolts.   🔧 Pro tip: put a drop of blue Loctite on the threads before installing to keep...
QUICK VIEW

Phil Wood 8mm crank arm bolts

$ 32.00

Looking for some indestructible crank arm bolts? You found them! Phil Wood crank bolts are machined from stainless steel and are 20mm long, which allows for more than 3/4" of...
QUICK VIEW

Shimano Dura Ace crank arm bolt & dust cap

$ 20.00

If you have DA 7710 crank arms and don't have bolts, these are the missing piece. You need them! specs • steel self-extracting bolt with washer & aluminum cap •...
QUICK VIEW

Specialites TA self-extracting crank arm bolts

$ 20.00

Also known as TA Auto-extractors. Aluminum dust caps w/ chrome-plated self-extracting cro-mo M8 crank bolts eliminate the need for a crank puller. Universally suitable for square taper crank arms with...
QUICK VIEW

Sram Omnium GXP crank arm bolt assembly

$ 12.00

So...you made a mess of the non-drive side fixing bolt on your Omniums? Remove the whole assembly, replace it and don't be such a hack this time!   ⚠️ This...
QUICK VIEW

Sram S300 GXP crank arm bolt assembly

$ 12.00

So...you made a mess of the non-drive side fixing bolt on your Sram S300 crank arm, did you? Remove the whole assembly, replace it and don't be such a hamfist...
QUICK VIEW

Phil Wood Outboard Bottom Bracket GXP adapter

$ 25.00

Sram cranksets use a unique bearing on the non-drive side with a smaller inside diameter than other outboard bearing cranksets.  This adaptor allows you to use your standard Phil Wood...
QUICK VIEW

Phil Wood Outboard Bottom Bracket dust cap

$ 6.00

Replacement dust caps for your Phil Wood OBB cups. If you have a Phil Wood OBB with the GXP adapter installed on the non-drive side, replacing it with one of...
QUICK VIEW

Sugino crank arm bolts & washers

$ 8.00

For those who prefer keeping it real when it comes to their Sugino crank arms, this is the same genuine Sugino hardware supplied with Sugino 75 & Super Lap bottom...
QUICK VIEW

Sugino crank arm bolts & washers - chrome

$ 12.00

For those who prefer keeping it real when it comes to their Sugino crank arms and want shiny chrome bolts & washers beneath their Sugino dust caps. Of course, they'll...
QUICK VIEW

Sugino dust caps

$ 25.00

Designing cranksets, bottom brackets and chainrings for Keirin riders for years, Sugino has built a reputation of being one of the best - if not the best - crank manufacturer...
QUICK VIEW

Sugino 75 Direct Drive crank arm bolt

$ 16.00

So...you went ahead and stripped the non drive-side pressure bolt for your Sugino 75 Direct Drive crankset, did you? Lucky for you, we have replacements. And stop being such a...
QUICK VIEW

Campagnolo Record Pista dust cap

$ 25.00

Looking for some Genuine Campagnolo Record Pista dust caps, Mr. Fancypants? Of course you are. specs • made in Italy • sold individually - if you need a pair, buy...
QUICK VIEW

cro-mo track chainring bolts

$ 6.00

Replace those rusty, crusty, shitty chainring bolts! Threaded all the way through to prevent bottoming out if the bolts are a little too long for the crank & chainring combo...
QUICK VIEW

stainless steel track chainring bolts

$ 15.00

Nothing is worse than seeing a nice crankset & chainring combo being held together with rusty, shitty bolts. Threaded all the way through to prevent bottoming out if the bolts...
QUICK VIEW

Campagnolo Record Pista chainring bolts

$ 65.00

Genuine Campagnolo steel chainring bolts for your track crankset. Serrated rear nut bites into the back of your crank arm so you don't have to deal with that spinny nonsense...
QUICK VIEW

Shimano Dura Ace 7710 chainring bolts

$ 25.00

Made of stainless steel with serrated nuts that set into the back of your crank arm holes and will stay put without needing to fuss with an annoying little chainring...
QUICK VIEW

Sram Omnium chainring bolts

$ 20.00

Need new bolts for your Omniums? Well, here you go! Made of aluminum and having a dual-hex design, these are the same as the stock bolts. specs • set of...
QUICK VIEW

Sugino AL TORX track chainring bolts

$ 35.00

Sugino TORX-30 alloy chainring bolts. Sized for a single chainring and perfect for your Sugino (or other) track cranks. To make these work on Omniums using the stock chainring, you...
QUICK VIEW

Sugino 75 knurled track chainring bolts

$ 25.00

Sized for a single chainring - perfect for the vast majority of track/single-speed cranks - with serrated nuts that bite into the back of your crank arm spider.   🔧...
QUICK VIEW

Phil Wood bottom bracket mud guards

$ 20.00

These mud guards are designed to help protect your Phil Wood cartridge bottom bracket cups from dust, dirt, mud and crud that can accumulate in and around the cup splines...

Sugino 75 left crank arm

$ 85.00 - $ 95.00
QUICK VIEW

Sugino 75 left crank arm

$ 85.00

Where the hell did your non-drive side crank arm go? Get a new one!   ⚠️ Some crank arms may have the old Sugino logo, some will have the newer...

Sugino 75 right crank arm

$ 175.00 - $ 185.00
QUICK VIEW

Sugino 75 right crank arm

$ 175.00

Everyone knows that when you post pictures of your bike on the internet, they absolutely must be drive side pics. Think of how impressed everyone will be when they see...
QUICK VIEW

9/16" pedal washers

$ 1.50

If you're using pedals that don't have a full circular contact on the crank arm (like MKS Sylvan or Custom Nuevo), you need these. Even if your pedals do make...

JOIN OUR MAILING LIST

What's that...you missed out on our last sale? Don't miss the next one!